Vape devices reviews: tested in Liverpool (v14)

Vape devices advice for Liverpool, covering hands-on review, what to look for and where the trade-offs actually sit.

There is no single best vape devices for everyone in Liverpool, and anyone telling you otherwise is selling something. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.6 Ω mesh coil is the newer generation.

Local availability in Liverpool shapes the practical answer more than the marketing does. Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.

Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Type-C fast charge takes about 70 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.6 Ω mesh coil is the newer generation.

Comparing this against a 70:30 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 6.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 578 full puffs from a charge at 6 mg/ml, based on average session length in our testing.

Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.

What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 40 and recharges over Type-C fast charge. We would pair the RELX Pro with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.

The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. In Liverpool, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself. Charging over Type-C fast charge takes about 70 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.

The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.

Specifications

Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.

Flavour and performance notes

A representative profile is Watermelon Chill: sweet, juicy, described as watermelon with a clean cooling exhale. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.

Practical considerations in Liverpool

Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.

Our advice is to order one, use it for a fortnight, and only then decide whether to stock up.