Vape devices maintenance guide (Vapouriz Max) (v2)
Vape devices advice for Liverpool, covering coil types, what to look for and where the trade-offs actually sit.
There is no single best vape devices for everyone in Liverpool, and anyone telling you otherwise is selling something. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
The gap between a mid-range and a premium vape devices narrows once you know which components you actually use. Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
We would pair the Hcigar Akso with a 50:50 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω regular coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
What surprised us most was how little the 0.8 Ω regular coil changes the draw character compared with the 50:50 PG/VG liquid sitting in the chamber. The Ocean Teal finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below.
Flavour tracking stays consistent from the first day to roughly the 0.8 Ω regular mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 0.8 Ω regular coil is the practical bottleneck, not the device itself. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. In Liverpool, availability of the 0.8 Ω regular coil is the practical bottleneck, not the device itself.
Charging over USB-C takes about 55 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 0.8 Ω regular coil is the newer generation. Battery behaviour is where the Hcigar Akso earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 200 and recharges over USB-C.
Expect roughly 1310 full puffs from a charge at 0 mg/ml, based on average session length in our testing. The throat hit is noticeably firmer than a 50:50 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Hcigar Akso |
|---|---|
| Brand family | Asvape |
| Battery capacity | 3000 mAh |
| Power range | 200 W |
| Liquid capacity | 2.5 ml |
| Coil | 0.8 Ω regular |
| Bottle size | 100 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | zinc alloy |
| Charge port | USB-C |
| Connector | 510 thread |
| Airflow | mesh window |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Strawberry Cream: creamy, sweet, described as smooth strawberry custard with a light dairy note. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω regular mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.8 Ω regular and the USB-C are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.